What Makes the Metric System Easy to Convert

Converting within the Metric System

Learning Objective(s)

· Perform arithmetic calculations on metric units of length, mass, and volume.

Introduction

While knowing the different units used in the metric system is important, the real purpose behind learning the metric system is for you to be able to use these measurement units to calculate the size, mass, or volume of different objects. In practice, it is often necessary to convert one metric measurement to another unit—this happens frequently in the medical, scientific, and technical fields, where the metric system is commonly used.

If you have a prescription for 5,000 mg of medicine, and upon getting it filled, the dosage reads 5 g of medicine, did the pharmacist make a mistake?

For a moment, imagine that you are a pharmacist. You receive three prescriptions for liquid amoxicillin: one calls for 2.5 centiliters, one calls for 0.3 deciliters, and one calls for 450 milliliters. Amoxicillin is stored in the refrigerator in 1 liter, 1 deciliter, and 1 centiliter containers. Which container should you use to ensure you are not wasting any of the unused drug?

To solve this problem, you need to know how to convert from one measurement to another as well as how to add different quantities together. Let's take a look at how to do this.

Converting from Larger to Smaller Units

Converting between measurements in the metric system is simply a matter of identifying the unit that you have, the unit that you want to convert to, and then counting the number of units between them. A basic example of this is shown below.

Example
Problem	Convert 1 kilometer to decimeters.
	km hm dam m dm cm mm ^ ^	Identify locations of kilometers and decimeters.
		Kilometers (km) are larger than decimeters (dm), so you expect there to be more than one dm in a km.
	×10 ×10 ×10  ×10 km hm dam m dm cm mm ^ ^	Count the intermediate units, multiplying by 10 as you go. (Since you are going from a larger unit to a smaller unit, you multiply.)
	1 km · 10 · 10 · 10 · 10 = 10,000 dm	Multiply to find the number of decimeters in one kilometer.
Answer	1 kilometer = 10,000 decimeters

This problem is straightforward because you are converting 1 kilometer to another unit. The example below shows how you would solve this problem if you were asked to convert 8.2 kilometers to decimeters. Notice that most steps are the same; the critical difference is that you multiply by 8.2 in the final step.

Example
Problem	Convert 8.2 kilometers to decimeters.
	km hm dam m dm cm mm ^ ^	Identify locations of kilometers and decimeters.
		Kilometers (km) are larger than decimeters (dm), so you expect there to be more than one dm in a km.
	×10 ×10 ×10  ×10 km hm dam m dm cm mm ^ ^	Count the intermediate units, multiplying by 10 as you go. Since you are going from a larger unit to a smaller unit, multiply.
	8.2 km · 10 · 10 · 10 · 10 = 82,000 dm	Multiply to find the number of decimeters in 8.2 kilometers.
Answer	8.2 kilometers = 82,000 decimeters

You can also apply the rules of base 10 to use the "move the decimal" shortcut method in this example. Notice how decimeters (dm) is four places to the right of kilometers (km); similarly, you move the decimal point four places to the right when converting 8.2 kilometers to decimeters.

Example
Problem	Convert 0.55 liters to centiliters.
		Count two places from liters to centiliters.
		In 0.55 l, move the decimal point two places to the right.
Answer	0.55 liters = 55 centiliters

How many dekaliters are in 0.5 deciliters?

A) 500

B) 5

C) 0.5

D) 0.005

Show/Hide Answer

A) 500

Incorrect. A dekaliter is larger than a deciliter, so you would expect the number of dekaliters in 0.5 deciliters to be smaller than 0.5. The correct answer is 0.005.

B) 5

Incorrect. A dekaliter is larger than a deciliter, so you would expect the number of dekaliters in 0.5 deciliters to be smaller than 0.5. The correct answer is 0.005.

C) 0.5

Incorrect. Deciliters and dekaliters are different units of measurement, so you would not expect 0.5 deciliters to equal 0.5 dekaliters. The correct answer is 0.005.

D) 0.005

Correct. One deciliter is 100 times smaller than a dekaliter, so you move the decimal point two places to the left to convert 0.5 deciliters to 0.005 dekaliters.

Converting from Smaller to Larger Units

You can use similar processes when converting from smaller to larger units. When converting a larger unit to a smaller one, you multiply; when you convert a smaller unit to a larger one, you divide. Here is an example.

Example
Problem	Convert 739 centigrams to grams.
	kg hg dag g dg cg mg ^ ^	Identify locations of centigrams and grams.
		Centigrams (cg) are smaller than grams (g), so you expect there to be less than 739 g in 739 cg.
	÷10 ÷10 kg hg dag g dg cg mg ^ ^	Count the intermediate units, dividing by 10 as you go. Since you are going from a smaller unit to a larger unit, divide.
	739 ÷ 10 ÷ 10 = 7.39 g	Divide to find the number of grams in 739 centigrams.
Answer	739 centigrams = 7.39 grams

Notice that the shortcut method of counting prefixes and moving the decimal the same number of places also works here. Just make sure you are moving the decimal point in the correct direction for the conversion.

Example
Problem	Convert 205.5 milliliters to kiloliters.
		Count six places from milliliters to kiloliters.
		Milliliters is smaller than kiloliters, so you expect the number 205.5 to get smaller as you move up the metric chart. In 205.5 ml, move the decimal point six places to the left.
Answer	205.5 milliliters = 0.0002055 kiloliters

Convert 3,085 milligrams to grams.

A) 3,085,000 grams

B) 308.5 grams

C) 3.085 grams

D) 0.3085 grams

Show/Hide Answer

A) 3,085,000 grams

Incorrect. Grams are larger than milligrams, so you would expect the number of grams in 3,085 milligrams to be less than 3,085. The correct answer is 3.085 grams.

B) 308.5 grams

Incorrect. One gram is more than 10 times larger than a milligram, so you would expect the number of grams to be less than 308.5. The correct answer is 3.085 grams.

C) 3.085 grams

Correct. One gram is 1,000 times larger than a milligram, so you can move the decimal point in 3,085 three places to the left.

D) 0.3085 grams

Incorrect. This is too small; one gram is 1,000, not 10,000, times larger than a milligram. The correct answer is 3.085 grams.

Factor Label Method

There is yet another method that you can use to convert metric measurements—the factor label method. You used this method when you were converting measurement units within the U.S. customary system.

The factor label method works the same in the metric system; it relies on the use of unit fractions and the cancelling of intermediate units. The table below shows some of the unit equivalents and unit fractions for length in the metric system. (You should notice that all of the unit fractions contain a factor of 10. Remember that the metric system is based on the notion that each unit is 10 times larger than the one that came before it.)

Also, notice that two new prefixes have been added here: mega- (which is very big) and micro- (which is very small).

Unit Equivalents	Conversion Factors
1 meter = 1,000,000 micrometers
1 meter = 1,000 millimeters
1 meter = 100 centimeters
1 meter = 10 decimeters
1 dekameter = 10 meters
1 hectometer = 100 meters
1 kilometer = 1,000 meters
1 megameter = 1,000,000 meters

When applying the factor label method in the metric system, be sure to check that you are not skipping over any intermediate units of measurement!

Example
Problem	Convert 7,225 centimeters to meters.
	7,225 cm = ___ m	Meters is larger than centimeters, so you expect your answer to be less than 7,225.
		Using the factor label method, write 7,225 cm as a fraction and use unit fractions to convert it to m.
		Cancel similar units, multiply, and simplify.
Answer	7,225 centimeters =  meters

Using whichever method you prefer, convert 32.5 kilometers to meters.

A) 32,500 m

B) 325 m

C) 0.325 m

D) 0.00325 m

Show/Hide Answer

A) 32,500 m

Correct. To find the number of m in 32.5 km, you can set up the following equation: . The km units cancel, leaving the answer in m.

B) 325 m

Incorrect. A km is more than 10 times the size of a m; look at the unit fractions and try your calculations again. The correct answer is 32,500 m.

C) 0.325 m

Incorrect. A km is larger than a meter, so you would expect the number of meters in 32.5 km to be more than 32.5. Look at the unit fractions and try your calculations again. The correct answer is 32,500 m.

D) 0.00325 m

Incorrect. A km is larger than a meter, so you would expect the number of meters in 32.5 km to be more than 32.5. Look at the unit fractions and try your calculations again. The correct answer is 32,500 m.

Now that you have seen how to convert among metric measurements in multiple ways, let's revisit the problem posed earlier.

Example
Problem	If you have a prescription for 5,000 mg of medicine, and upon getting it filled, the dosage reads 5 g of medicine, did the pharmacist make a mistake?
	5,000 mg = ___ g?	Need to convert mg to g.
Answer	5 g = 5,000 mg, so the pharmacist did not make a mistake.

Summary

To convert among units in the metric system, identify the unit that you have, the unit that you want to convert to, and then count the number of units between them. If you are going from a larger unit to a smaller unit, you multiply by 10 successively. If you are going from a smaller unit to a larger unit, you divide by 10 successively. The factor label method can also be applied to conversions within the metric system. To use the factor label method, you multiply the original measurement by unit fractions; this allows you to represent the original measurement in a different measurement unit.

macdougallnoth1952.blogspot.com

Source: http://www.montereyinstitute.org/courses/DevelopmentalMath/COURSE_TEXT_RESOURCE/U06_L2_T2_text_final.html

Share :